An opinionated but customizable set of configs and scripts designed to help you quickly set up your system. It's aimed at anyone who deeply cares about how they use computers (developers, power users, etc.).
In 1 command and ~5 minutes you can get a new or existing system set up with terminal based tools and workflows on Arch / Debian based Linux distros (WSL 2 included) and macOS.
If you're on an Arch based distro you can optionally set up a complete niri based desktop environment.
Just like fried rice, you can mix and match an assortment of flavors.
I deeply understand one person's bloat is another person's treasure. All packages, configs and symlinks are configurable before you modify your system. A mini-goal of this project is to avoid needing to fork this project while still giving you a reasonable amount of control, but if you want to use a fork that's fine too.
Your machine is yours. If you want to dual boot, do it up. If you want multiple users, sure thing. If you don't want to encrypt your drive, no problem. Everyone is welcome here and you have full control.
🛟 Supports Arch Linux, both vanilla and Arch based distros such as CachyOS, etc.. It also supports Debian, Ubuntu (vanilla and all flavors), macOS and there's WSL 2 support for any supported Linux distro.
- Tweak out your shell (zsh)
- Set up tmux
- Fully configure Neovim
- Create SSH / GPG keys if they don't already exist
- Install modern CLI tools and programming languages
🛟 Supports Arch Linux, both vanilla and Arch based distros such as CachyOS, etc.
- niri (Wayland compositor), Waybar (status bar), Walker (app launcher) and friends
- Hotkey focused but tons of mouse / trackpad support
- Prefer TUI (Terminal User Interface) apps over GUI apps when possible
- Development / media creation focused apps are ready to go
It's resource efficient, extremely stable, lightning fast, infinitely tweakable, intuitively handles scrolling / tiling / floating windows, integrates awesomely with multiple monitors, actively developed, well thought out, has great documentation and the author is very helpful.
niri feels like a perfect match and I wanted to make a special call out because it's that good. I'm the "I was there 3,000 years ago" meme from Windows 2000, XP, 7, 10 and also macOS on company issued laptops. Nothing I have ever used in ~25 years has approached how I feel using this set up. It's not even close (yes I tried Hyprland too).
I recorded a demo video on how I use niri in my day to day. This repo will always have the most up to date changes so what you see on video will likely evolve over time!
There's docs with a list of packages and scripts along with what they're being used for and why.
The source of truth can always be found within the files at _install/default/. You'll find files related to packages, standalone scripts, programming languages and more.
- Themes
- Quickly Get Set Up
- FAQ
- How to personalize DotFriedRice?
- How to theme custom apps?
- How to add custom themes?
- How to install Arch Linux?
- How to get started with the desktop environment?
- How much resources does the desktop environment use?
- How to get set up on Windows to install WSL 2 and a distro?
- Where is the original Vim config?
- Feedback and Code Contributions
- Donations
- About the Author
I prefer using themes that have good contrast ratios and are clear to see in video recordings. DFR (DotFriedRice) supports easily switching between themes and you can create custom themes too.
You can look in the _themes/ directory to see which apps are themed and add additional apps too. If you don't like the included themes that's no problem, you can add custom themes and remove the defaults.
# Get a full list of themes by running: dfr-theme-set --list
# There's also a --menu flag to preview themes in the desktop environment.
#
# Optionally you can skip adding a theme name and the next theme will be picked.
dfr-theme-set THEME_NAMEWhen switching themes all GTK apps will live update (Firefox, Thunar, GIMP,
etc.) and most terminal apps will live update too. If you have a bunch of
shells already open in tmux you can run the SZ alias (source
zsh)
to source new theme related configs.
Only available when the desktop environment is set up.
# Get a full list of wallpapers by running: dfr-theme-set-bg --list
# There's also a --menu flag to preview wallpapers.
#
# Optionally you can skip adding a wallpaper name and the next wallpaper will be picked.
dfr-theme-set-bg WALLPAPER_NAMEYou can cycle between wallpapers that are compatible with the active theme.
This is controlled through the _theme.json file in each theme's directory,
it's under the wallpaper.synergy object.
There's an automated script to get you going quickly (we'll go over running it soon). It handles checking system compatibility and installing / configuring everything in a few minutes.
You'll be able to choose where you want to clone DotFriedRice to and also have an opportunity to review and edit what gets installed if you have different tastes.
If you plan to use the desktop environment you'll want to set up a bootable USB stick with the official Arch Linux ISO and then run the official archinstall script. There is a FAQ item covering that with video guides.
For the command line version, it's unlikely you'll run into any conflicts when installing DotFriedRice.
If you're on WSL 2, there's a dedicated FAQ item for getting set up with WSL 2 and installing a distro. Please follow that before installing DotFriedRice.
If you're on macOS, you're good to and don't need to do anything extra.
If you're on an Arch based distro, you're good to go and don't need to do anything extra.
If you're on Debian / Ubuntu the only thing you need installed ahead of time is
curl which you can do with apt-get update && apt-get install --yes --no-install-recommends curl.
For the desktop environment on Arch based distros, DotFriedRice won't modify other environments you have. It will install everything and configure your user's shell to launch niri after logging in. It won't interfere with a login manager if you have one.
With that said, if you plan to go all-in with the desktop environment it's worth considering backing up your files and creating a fresh install but it's not technically required if you do manual cleanup. It's up to you!
You can download and run the bootstrap script with this 1 liner:
bash <(curl -fsSL https://raw.githubusercontent.com/nickjj/dotfriedrice/master/bootstrap)You'll be presented with a y/n prompt before installing anything of substance.
If you're not comfortable blindly running a script on the internet, that's no problem. You can view the bootstrap script to see exactly what it does. The bottom of the file is a good place to start. Alternatively you can look around this repo and reference the config files directly without using any script.
🐳 Try the command line version in Docker without modifying your system:
# Start a Debian container, we're passing OS_IN_CONTAINER to be explicit we're in a container.
docker container run --rm -it -e "OS_IN_CONTAINER=1" -v "${PWD}:/app" -w /app debian:stable-slim bash
# Copy / paste all 3 lines into the container's prompt and run it.
#
# Since we can't open a new terminal in a container we'll need to manually
# launch zsh and source a few files. That's what the last line is doing.
apt-get update && apt-get install --yes --no-install-recommends curl \
&& bash <(curl -fsSL https://raw.githubusercontent.com/nickjj/dotfriedrice/master/bootstrap) \
&& zsh -c ". ~/.config/zsh/.zprofile && . ~/.config/zsh/.zshrc; zsh -i"Keep in mind with the Docker set up, unless your terminal is already configured to use Tokyonight Moon then the colors may look off. That's because your local terminal's config will not get automatically updated.
🚀 Keeping things up to date and tinkering
Once you've installed DotFriedRice you can run cd $DOTFRIEDRICE_PATH to
manage it moving forward. There's also the dfr alias to move into that
directory and open it in your configured editor.
Here's a few handy commands you can run from anywhere:
dotfriedrice- Install everything based on your local copy of DotFriedRice (you can run this regularly)
- Keeps your system up to date and applies local config changes
dotfriedrice --skip-system-packages | -S- The same as above but skip installing or updating packages
- Helps regenerate symlinks, configs and everything else without modifying packages
dotfriedrice pull- Pulls in the latest remote commits but doesn't install anything
- Lets you review any changes locally before you install anything
dotfriedrice update- Pulls in the latest remote commits and installs everything
- Shortcut to pull and install in 1 command
dotfriedrice diff-config- Compare your local
dotfriedrice-configto the localdotfriedrice-config.example - Helps keep your git ignored
dotfriedrice-configin sync with new options
- Compare your local
dotfriedrice diff- Compare what you have locally vs the latest remote commits
- See what will change if you
dotfriedrice pullwithout modifying your git tree
dotfriedrice new-commits- Show new remote commits that do not exist locally
- Present a quick list of what's available to pull locally
dotfriedrice changelog- Show all remote commits
- Present a quick list of all commits to see what has changed over time
dotfriedrice local-files- Show all local git ignored files such as configs, history and scripts
- Useful to see everything not committed and for optionally backing up those files
- Example:
dotfriedrice local-files | xargs zip local-files.zip
- Example:
dotfriedrice debug- Show DotFriedRice environment and system information
- Can be used to help report issues and check your system stats
You can always see a list of commands by running dotfriedrice --help.
If you just ran the dotfriedrice script and haven't done so already please close your terminal and open a new one. If you've set up GUI mode with Arch Linux you'll want to reboot instead.
There's a few ways to customize DotFriedRice from customizing the dotfriedrice-config which is git ignored to forking it. The first method lets you adjust which packages and programming languages get installed as well as configure a number of other things without using a fork.
Before you start customizing other files, please take a look at the personalization question in the FAQ.
The dotfriedrice-config lets you customize a
few things but chances are you'll want to personalize more than what's there,
such as various Neovim settings. Since this is a git repo you can always do a
dotfriedrice pull or git pull to get the most up to date code, but then
you may find yourself clobbering over your changes.
We have a few reasonable options without custom branches or forking:
- For minor changes like adjusting which packages get installed, the install config file lets you do that
- For minor config changes some tools let you include config files, so any git ignored
.localfiles you see is a way to customize them without needing to adjust the main config - For major config changes can configure the
CONFIG_INSTALLcommands to symlink other files and directories that are git ignored, this lets you keep your "real" files in the DotFriedRice repo with a different name or keep them in~/.configdirectly, it's up to you!
If the above isn't enough, or maybe you want things more streamlined you can
git checkout -b personalized and now you're free to make whatever changes you
want on your custom branch. When it comes time to pull down future updates you
can run a git pull origin master and then git rebase master to integrate
any updates.
Another option is to fork this repo and use that, then periodically pull and
merge updates. It's really up to you. By default DotFriedRice will add an
upstream git remote that points to this repo for easy comparison.
I personally use DotFriedRice on 3 different devices with different operating systems and haven't forked or created separate branches on any of them. I just tweaked the install config.
You'd add its theme file to each theme in _themes/ and update the
dotfriedrice script's set_theme function to symlink the
config. If the app you're theming has no dedicated config file, you can copy
what I did for the Microsoft Terminal in set_theme.
Happy to assist in your issue / PR to answer questions if you want to contribute your change.
- Locate the _themes/ directory in this repo
- Copy one of the existing themes' directory
- Rename your directory, this will be your theme's name
- Adjust all of the colors as you see fit
Switch to it by running dfr-theme-set NEW_THEME_NAME and use the name you
picked in step 3.
If you added a theme with good contrast ratios please open a pull request to get it added to this project.
Nothing here is too specific to DotFriedRice, it's general knowledge on setting up Arch but I wanted to include these steps to help get things cooking.
Here's a written and video tutorial for Windows, Linux and macOS.
- Follow any instructions it says before running
archinstall- For example if you use Wi-Fi you'll want to run
iwctlto set up your network:iwctldevice listshows devices such aswlan0which we'll use belowstation wlan0 scansearches for networks (no output is normal)station wlan0 get-networkslists your Wi-Fi networksstation wlan0 connect <NETWORK_NAME>prompts you for your passwordexitbrings you back to your shell- You should be connected to the internet at this point
- Verify with
ping example.comand hit CTRL+c to stop
- Verify with
- For example if you use Wi-Fi you'll want to run
If you prefer video, here's a walkthrough of what's listed below. Keep in mind the archinstall script changes over time. The steps listed below will always have the latest updates. Even if the video gets slightly outdated because a menu item changed the general tips and concepts still apply!
The script guides you pretty well. Here's a few important callouts in the order they appear in the menu. The callouts are mostly my opinions, you can of course choose other options and have things work. The goal of this guide isn't to dictate what you do, it's to help you avoid analysis paralysis and see what's configurable before you do it.
Nothing you choose will happen immediately, you'll get to review everything at the end before anything happens. Generally speaking you'll be using enter to select options, escape to go back, the arrow keys to change selections and space to toggle checkboxes.
- Archinstall language:
- Pick what makes sense for your location
- Locales:
- Pick what makes sense to you for all of the sub-sections
- Mirrors:
- Select a region close to where your live
- Optional repositories:
- You can skip this unless you have reasons otherwise
- Disk configuration:
- If you go with the default "best effort" it will wipe your full drive:
- This is reasonable if you're not dual booting, if you dual boot you'll want to manually set this up
- Make sure the correct drive you want wiped is selected!
- For the file system type, I went with
ext4given how mature it is butbtrfsis also mostly ok, if you're not sure or don't know what's different just chooseext4 - Now it asks if you want a separate partition for your home directory, I chose no because I always end up wanting to adjust the size later and prefer skipping LVM but it's up to you of course
- Review the info, you should see
/bootand/(root) partitions at the very least
- Disk encryption:
- It's up to you, I would, choose to encrypt all of your non-boot partitions and set a good password, then double confirm you can remember this password, it's very important
- After choosing LUKS as the type and your password, pick which partitions to wipe + encrypt, encrypt at least the root partition and skip the boot partition
- If you go with the default "best effort" it will wipe your full drive:
- Swap:
- It's up to you, I kept it enabled with zram which was the default
- Bootloader:
- I rolled with
systemd-bootwhich is the default - Unified kernel images:
- I left this turned off but I suggest reading up on this more if you're interested
- I rolled with
- Kernels:
- The normal kernel is likely fine which is the default but feel free to choose otherwise
- Hostname:
- Picking a cool name will probably be the longest time you spend in the installer
- You can always change it afterwards, don't sweat it!
- Authentication:
- Root password:
- Definitely set a password and don't forget it
- User account:
- Create your main user and pick a password you won't forget
- Allow this user to be a superuser (sudo) as well
- You'll be logging in as this user, you can create more users later if needed
- Root password:
- Profile:
- You can skip this (leave it unselected)
- DotFriedRice handles setting up your desktop environment (including GPU drivers)
- Applications:
- DotFriedRice will configure "Bluetooth" and "Audio", you can skip them
- If you have a printer you may want to configure the "Print service"
- Network configuration:
- Go with "Copy ISO network configuration" unless you have other opinions
- This just means it will use whatever you used in this bootable USB environment
- Pacman:
- You can leave the defaults, DotFriedRice will configure Pacman for you
- Additional packages:
- You can skip this as DotFriedRice will install everything for you
- Timezone:
- Pick what makes sense for your location
- Automatic time sync (NTP):
- Yep, turn this on, it will use
systemd-timesyncdfor this
- Yep, turn this on, it will use
At this point you can write this configuration to the USB drive for next time (not necessary), install or abort. Choose install which will then show you a load out of what's going to happen.
Before hitting enter to continue, you can use page up / down to see what's going to happen. Triple check your drive being formatted is the correct one and everything else looks good!
- Sit back and relax while everything gets installed in ~2 minutes
- Choose "Exit archinstall" when it prompts you after it has finished
- Remove the USB drive from your computer
- Run
reboot - Configure your BIOS to boot from the drive you just installed Arch on
Depending on what boot loader you used, you can pick Arch Linux to boot into.
If everything worked properly, you'll get booted into a tty1 black login
screen. You can log in with the user and password you created. If you enabled
drive encryption you'll get prompted for your decrypt password before logging
in.
At this point you have Arch installed and you can run the bootstrap script mentioned earlier in this readme to install DotFriedRice!
After logging in you'll be greeted with an empty desktop and a top bar:
- A few key binds:
Mod + Alt + T :: TerminalMod + Alt + B :: BrowserMod + / :: Show Global Hotkeys
- Connect to Wi-Fi if needed by clicking the Wi-Fi icon in the top right
- Alternatively you can run
impalafrom a terminal - If your system has no Wi-Fi adapter this tool won't be installed
- Alternatively you can run
- Connect Bluetooth devices if needed by clicking the Bluetooth icon in the top right
- Alternatively you can run
bluetuifrom a terminal - If your system has no Bluetooth adapter this tool won't be installed
- Alternatively you can run
- Verify your sound works by visiting YouTube or some site with audio
- There's a sound icon in the top right to pick your input and output devices
- Alternatively you can run
wiremixfrom a terminal - Both
mpdand rmpc are installed for playing music, configure your music directory!
- Open a terminal and run
dtto switch to the DotFriedRice repo and open it in Neovim- Explore
.config/niri/config.kdlfor a complete list of key binds
- Explore
- Have fun with your new system!
Very little! DotFriedRice works great on high end and low end machines.
On a fresh boot, the total system memory used is about 1 GB. GPU memory will vary depending on which GPU vendor you use but it's only a few hundred megs with niri and Walker loaded.
To put things into perspective my main desktop was built from parts in 2014. I have an i5-4460 quad core CPU at 3.4ghz with 16 GB of RAM and an SSD. I used a GeForce 750 Ti (2 GB) GPU for a long time and things were mostly ok. I eventually switched to an AMD RX 480 (8 GB) GPU because I noticed with 2 GB on an NVIDIA card I'd sometimes run out of VRAM while recording videos with a lot of things open.
Long story short, the system blazes. After switching from Windows 10 it felt like I got a hardware upgrade. This is thanks to the Linux kernel, Arch Linux, niri and generally people caring about performance!
I spend all day working on this machine developing web apps, running Docker containers, Virtual Machines, recording and editing videos, a little gaming, etc.. I don't feel held back with performance, even with this 2014 era machine.
First, you'll likely want the official Microsoft Terminal. It's great for running WSL 2 as well as PowerShell and good old command. I used it for years. You can download it from the Microsoft Store.
Open PowerShell as an administrator and then run:
# Install WSL 2 if it's not already installed, then reboot when Windows requests to.
wsl --install
# Update WSL 2 to the latest version if it's not already up to date.
wsl --update
# Check if WSL 2 is the default version, and set it to 2 if not.
wsl --status
wsl --set-default-version 2I suggest Arch Linux but using Ubuntu or Debian will work too. I'll include instructions for Arch Linux below but give tips for Ubuntu / Debian along the way.
Open PowerShell as an administrator and then run:
# This will start downloading the official Arch Linux distro, when it completes
# you'll be placed into a root prompt within Arch Linux running in WSL 2.
wsl --install archlinuxIf you choose to install Ubuntu, the commands below aren't necessary as it will prompt you for a user to create along with a password and then set that as the default. After that you can skip to "Configuring Windows" below.
Let's configure a few things within Arch Linux. If you were to install native Arch Linux these steps would normally be done during the installation of Arch Linux through the bootable USB drive:
# Update system packages to their latest version and press "y" to confirm.
pacman -Syu
# Set your root user's password.
passwd root
# Create your main user, replace "nick" with the user you want to create.
useradd -m -G wheel nick
# Set your user's password, replace "nick" with the user you created above.
passwd nick
# Set your locale, for example here's how to set it for en_US.UTF-8. If you
# want to use something else and you're not sure what to set you can run
# cat /etc/locale.gen to look at what's available. Replace all (3) values below
# before running these commands with your adjusted value as desired.
sed -i "s/^#en_US.UTF-8 UTF-8/en_US.UTF-8 UTF-8/g" /etc/locale.gen
echo "LANG=en_US.UTF-8" > /etc/locale.conf
locale-gen
# Configure Windows (registry) to login as this user by default, replace "nick"
# with the user you created above.
wsl.exe --manage archlinux --set-default-user nickThat takes care of configuring the Linux side of things. Moving forward you can launch the Microsoft Terminal and then pick Arch Linux (or Ubuntu, etc.) from the tab drop down box to launch it.
In addition to the above, there's a few Windows things to configure once. There's a few config files that I have in a few directories of this repo. These are in the mnt/c/Users/Nick directory.
It is expected that you copy them over to your system while replacing "Nick" with your Windows user name if you want to use them. The Microsoft Terminal config will automatically be copied over to your user's path when you install DotFriedRice.
Pay very close attention to the mnt/c/Users/Nick/.wslconfig file because it
has values in there that you will very likely want to change before using it.
This commit
message
goes into the details.
You may have noticed I don't enable systemd within WSL 2. That is on purpose. I've found it delays opening WSL 2 by ~10-15 seconds and also any systemd services were delayed from starting by ~2 minutes.
At this point, you can install DotFriedRice from inside your WSL 2 instance, have fun!
I've made dozens of blog posts and videos about Vim. Sometimes I linked directly to a commit so there's a permalink to it but other times I did not.
Before switching to Neovim I made a vim git tag. You can check out the state
of the repo for that tag by going
here. You'll see .vimrc in the
root directory. If you cloned DotFriedRice locally you can git checkout vim. Keep in mind that's frozen to that point in time. Future updates
unrelated to Vim will not be included in that tag.
You're more than welcome to offer suggestions and improvements!
If you consider opening an issue, discussion or pull request please remember, I am 1 person doing this as a hobby. I maintain dozens of projects and would love to collaborate on anything related to this project but please don't blindly drop a bunch of agent generated slop onto this project.
If you want to use AI or agents to help please do but there's an expectation that you understand the code you're submitting. We're dealing with Bash here, life is too short to deeply analyze a 200 line AI rewrite diff because it hallucinated errors instead of changing double quotes to single quotes in 1 spot.
GitHub tips is available in the side bar of this repo.
I'm not expecting anything. I'm doing this because I enjoy it but if this tool helps save you time or helps you create a computing environment that you enjoy using, tips would be greatly appreciated!
I'm in this for the long haul. I've been maintaining this repo since 2018.
I'm a self taught developer and have been freelancing for the last ~20 years. You can read about everything I've learned along the way on my site at https://nickjanetakis.com. There's hundreds of blog posts and a couple of video courses on web development and deployment topics. I also have a podcast where I talk with folks about running web apps in production.