Perle build with VyOS

About this repository

This is the top level repository that contains links to repositories with VyOS specific packages (organized as Git submodules) and scripts and data that are used for building those packages and the installation image.

Repository Structure

There are several directories with their own purpose:

• docker/ Docker build environments

• patches/ Patch files to update scripts and packages

   fs/           Customized file system changes for Perle Systems
   linux-kernel/ Customized Linux-Kernel changes for Perle Systems
   ti_bdebstrap/ Customized patch files to build "ti_bdedstrap" for Perle Systems
   vyos-build/   Customized Patch files to build "VyOS" for Perle Systems
  

Clone the repo

To clone the repo

git clone https://github.com/jkim71/perle-vyos.git

Building

This is designed to build in a Dockr container.

To install a docker, see Install Docker Engine on Debian.

To build a docker image

docker build -t vyos/vyos-build:current-arm64v8 docker --build-arg ARCH=arm64v8/ --platform linux/arm64/v8 --no-cache

To run the docker image

docker run --rm -it --privileged --sysctl net.ipv6.conf.lo.disable_ipv6=0 \
  -v $(pwd):/vyos -v /dev:/dev -v /etc/fstab:/etc/fstab \
  -v "$HOME/.gitconfig":/etc/gitconfig -w /vyos \
  vyos/vyos-build:current-arm64v8 bash -c "sudo sed -i 's|Defaults\s\+secure_path=\"\(.*\)\"|Defaults secure_path=\"\1:/opt/go/bin\"|' /etc/sudoers && /bin/bash"

Currently, it supports 2 platform which are "bookworm-am64xx-evm" and "bookworm-j7200-evm"

To support auto-complete for above platforms, run below command before you build system. (use 'tab' to auto-complete)

source ./autocomp.sh

1. On ARM platform (Mac PC which has M series CPU) To build whole system, run below command

./perle-vyos-image.sh <platform>

2. On x86 platform(Windows PC. Intel/AMD CPUs) To build whoile system, run below command

./perle-vyos-image.sh <platform>

Then, to build TI BSP package, run below command from outside of the docker container

./ti-bsp-image.sh <platform>

Then it will create final images (Boot and Rootfs) at "vyos-build/ti-bdebstrap/build/"

To flash it to a SD card, connect a SD card and run below command

./flash-sdcard.sh <platform>