Squid HTTPS Proxy Setup

This guide provides instructions for setting up Squid as an HTTPS proxy on a vps server. Squid is a caching proxy that supports various protocols. This guide specifically focuses on HTTPS proxying for improved security and privacy.

---

Requirements

Before you begin, ensure you have the following:

• A server running a Linux distribution (Ubuntu/Debian is used in this guide)
• Root or sudo access to the server
• Basic understanding of terminal commands

Installation

To install Squid and necessary utilities, run the following commands:

sudo apt update
sudo apt install squid apache2-utils

Configuration

To configure Squid with basic authentication and safe port definitions, follow these steps:

1. Edit the Squid configuration file Located at /etc/squid/squid.conf with your preferred text editor, such as nano:

sudo nano /etc/squid/squid.conf

Replace the file's full text with the following configuration code and save it. This setup includes ACL definitions for local networks, safe ports, SSL ports, and the authentication parameters:

acl localnet src 0.0.0.0/0.0.0.0
acl SSL_ports port 443
acl Safe_ports port 80 21 443 70 210 1025-65535 280 488 591 777
acl CONNECT method CONNECT

auth_param basic program /usr/lib/squid/basic_ncsa_auth /etc/squid/passwd
auth_param basic children 5
auth_param basic realm "Squid proxy-caching web server"
auth_param basic credentialsttl 2 hours
auth_param basic casesensitive off

acl auth_users proxy_auth REQUIRED

http_access allow localnet
http_access allow localhost
http_access allow auth_users
http_access deny all

http_port 3128

coredump_dir /var/spool/squid

2. Allow connections to the proxy port After configuring Squid, complete the setup by allowing traffic through the proxy port and restarting the Squid service to apply your changes:

sudo ufw allow 3128
sudo systemctl restart squid

3. Create user & password for authentication you'll need to create a password file for Squid authentication. Replace username with your desired username:

sudo htpasswd -c /etc/squid/passwd username

After entering, you need to set up a password, enter and confirm a password for the user. You can create a new user by simply changing the username and setting a password.

Usage

To use the proxy, configure your browser to use the following settings:

• Proxy server: ip your server ip
• Port: 3128 Default port
• Username and password: Use the credentials from the password and username you created earlier.
• Demo: 111.1.1.111:3128:demopass:123456

This configuration will route your browser traffic through the Squid proxy, requiring authentication with the username and password you've set up.

Author 📝

• Name: Bisnu Ray
• Telegram: @SmartDev

Feel free to reach out if you have any questions or feedback.