[!WARNING] I replaced that printer, so all this may be outdated
Recently I replaced my Octoprint/Marlin-FW combination with Mainsail/Klipper. In the Mainsail folder I collect all the settings, macros etc for my setup. But a warning: My good old Anycubic i3 is modified, so a lot of settings may not work on other machines out of the box. My mods (incomplete list) are: BL Touch for mesh bed leveling, Trinamic stepper drivers, better fans and lots of small stuff I forgot about.
Stuff for my Neptune 4 Pro
A collection of 3D printed parts I designed. The parts are either designed with OpenSCAD (the .scad files) or FreeCAD (the .FCStd files) but I usually also commit the exported STLs.
Parts to improve Zach307s awesome Desktop Ballista. Also available on Thingiverse
Bracket for a push button and two 12V sockets, used in my camper
Bracket for four carling switches and a LED dimmer. Separated in two parts for printing
Bracket for a 3GAS Gas Sensor to mount on 30x30 profiles.
Clip for Edding Pens
Top and bottom parts to build a display case for collectors figures. Designed for "Plexiglas XT" tubes with a outer diameter of 120mm and 3mm thickness. The Top (currently WIP) supports LEDs.
A few different gridfinity boxes for brushes, sculpting tools and similar stuff. All of them with a bit thicker walls than usual.
A 2x2 stand for DSPIAEs acrylic sanding pads.
A cupholder designed for the Helinox chair two. Maybe works with other chairs too
A soldering iron stand (german: "Lötständer") for a USB soldering iron and its tips.
A holder heltecs LoRa display antenna
A simple case for LilyGos LoRa v1.3 module. No cover yet
For the Miniware MHP30 Heatplate: A little holder/spacer for keeping the PCBs straight.
Boxes for Mansions of Madness (Villen des Wahnsinns) for all the Tokens, Cards etc.
A small piece for the MoM NPC Tokens.
A small assistance for drilling holes into 20mm aluminum profiles. Uses hex nuts as drill guide
A small assistance (In german "Bohrhilfe") for drilling holes into 30mm aluminum profiles. Uses hex nuts as drill guide
Fixation for 30x30 aluminum profile hinges. The hinges I've got cannot really handle a lot, so I designed these thingys to fix the profiles in position.
A lock I designed for the rack in my Volkswagen Caddy. Designed for Item 30x30 aluminum profiles but will probably work with others too.
A wall-mounted clip for a Wurkos TS21 LED flashlight. I screwed it to a 30x30 profile, but its not limited to these profiles
