Banding artifacts against gradual sloping obstacles

[rlguy]

• CPU: Intel i7 7700
• RAM: 32 GB
• GPU: GTX 1070, 8 GB
• OS: Windows 8.1
• Blender Version: 2.79
• Addon Version: 0.1.1

A banding effect can be seen in the fluid particles when a thin layer of fluid is sliding down a gradual sloping obstacle.

Example .blend file:
https://www.dropbox.com/s/a9om9oimpbiii0a/gradual_slope_banding_artifacts.blend?dl=0

Note: this issue is about simulation banding artifacts rather than mesh banding artifacts. Simulation banding artifacts cause particles to group and align to the grid. A fix for mesh banding artifacts can be found here: https://github.com/rlguy/Blender-FLIP-Fluids/wiki/Scene-Troubleshooting#mesh-banding-artifacts-against-curved-obstacles

[EverSimo]

I've noticed this behavior too.

Beach Render (unfinished)

Any hope to get a solution for this artifacts?

[rlguy]

Yes, I hope to get this fixed, but have not yet had time to test different solutions to this problem.

By the way, I am not able to view your video link:

Access to r4---sn-q4flrner.googlevideo.com was denied
You don't have authorisation to view this page.
HTTP ERROR 403

[EverSimo]

Please, try again... sorry...

Beach Render (unfinished)

[niklassjogren]

Could this be the same error, I get some strange lines in the fluid in a whirling motion, or is it me?
https://gfycat.com/DirtyFinishedAphid

/Niklas

[rlguy]

Hey niklassjogren,

This looks like it is actually a meshing issue rather than a simulation banding issue.

The mesh generator uses a grid to convert particles to a triangle mesh. When thin layers of fluid are against an obstacle, the particles may not show up well on the meshing grid. Some fixes for this are to:

1. Increase surface subdivision level - This will create a finer mesh grid and generate a higher quality fluid mesh. This will also take more time to compute. This setting is located in the FLIP Fluid Surface settings.
2. Increase particle scale - This will increase particle size when meshing. The particles will show up better on the meshing grid. This does not take much more time to compute, but your fluid surface may end up looking 'blobby'. Try setting the scale to something like 1.50. This setting is also located in the FLIP Fluid Surface settings.

[grantwilk]

Seeing similar issues in my wave simulations. Hoping this issue hasn't been forgotten :)

[rlguy]

This issue haunts me and I can assure you it has not been forgotten! I spent a few hours earlier this week to try a few things, but did not find a solution. I've come to the conclusion that I should build some debugging tools to better visualise/understand what could be causing this issue whether it be a bug or flaw in the simulation method. I've actually planned to devote the entire week of April 23rd - 27th to work on this if needed!

[enzyme69]

I am getting same issue with what I am doing (obstacle with lots of curvey surface). Banding happens, when radius increased, it becomes too blobbies...

[rlguy]

Hey @enzyme69, if increasing particle radius is making the fluid too blobby, I would suggest trying to increase the subdivision level to 1. This will improve the detail of the surface and can help fill in the banding gaps.

[PavelBlend]

Another way to get rid of these artifacts is to disable the "Mesh Around Obstacles" checkbox. But in the last experimental build there is no this parameter. I often turned off this checkbox.

[rlguy]

Meshing in the later versions have changed and the Mesh Around Obstacles option was removed due to being out of date and no longer compatible. The new default setting for how fluid is mesh around obstacles (Mesh Inside Obstacle) works similar to the old Mesh Around Obstacles and can help reduce meshing artifacts.

Note: this issue is about simulation banding artifacts rather than mesh banding artifacts. The simulation banding artifacts cause particles to group and align to the grid:

Many of the comments in this thread are related to mesh banding artifacts (of which here is a fix). I'll add a note about this to the top post and hide some comments to make this issue more clear.