Scope on Raspberry Pi

[HebiMigrator]

I want to know if the Scope app can be installed on a Raspberry Pi after setting cross compilation for 64bit? I am using the X-series actuators.

Originally posted by hebi_newbie on forums.hebi.us » Tue Dec 31, 2019 3:56 pm

[HebiMigrator]

Scope currently does not support Raspberry Pi or other ARM-based platforms.

This is in part because there are no pre-built binaries (jmods) for OpenJFX:
https://gluonhq.com/products/javafx/

Originally posted by dave_rollinson on forums.hebi.us » Tue Dec 31, 2019 4:40 pm

[HebiMigrator]

Also, just in case you are not aware I'd also like to point out that Scope is independent from the APIs and can be run on any computer on the same network.

So as long as you are connected, you can run Scope from your development machine even if the robot is controlled from a Raspberry Pi.

Originally posted by dave_rollinson on forums.hebi.us » Tue Dec 31, 2019 4:40 pm