From 58671ecc2b6f57f810a4421d8811432fe6bc2627 Mon Sep 17 00:00:00 2001 From: Anders Einar Hilden Date: Thu, 4 May 2023 21:07:04 +0200 Subject: [PATCH 1/3] =?UTF-8?q?BOM4/5:=20Fix=20"0.5mm"=20inserts,=20and=20?= =?UTF-8?q?specify=20=E2=8C=80/height=20on=20magnets?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- README.md | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/README.md b/README.md index 7d1dee8..28bd1ed 100644 --- a/README.md +++ b/README.md @@ -230,10 +230,10 @@ AU: Unique Prints (https://uniqueprints.shop), PhaserFPV (https://www.phaserfpv. - GDStime 6000rpm Dual Ball bearing on Aliexpress (This is 12V rated fans) - Delta BFB0524HH (This is 24V rated fans) - Avoid mechatronics fans for this purpose. -- 5x M3x0.5mm Heatset inserts (standard voron issue) +- 5x M3, 5 mm OD, 4 mm height heatset inserts (standard voron issue) - 2 for seating plenum to base - 2 for seating plenum lid to plenum -- 8x 6x3mm cylindrical magnets +- 8x ⌀6x3 mm cylindrical magnets - 1x 2 pin JST header - 4x M3x16 BHCS - for heat inserts that go into the four fan tabs @@ -265,10 +265,10 @@ Optional for Vorons or any printer using 24PSU - 1x 5015 blowers (rating above 200Pa / 20mmH2O / 1 inH2O) - Sunon Maglev MF5015VX (high speed version, 6000 rpm. The 5000 rpm might be okay also) - or, the $4-6 GDStime 6000rpm Dual Ball bearing on Aliexpress -- 4x Heatset inserts (M3x0.5mm, standard voron issue) +- 4x M3, 5mm OD, 4mm height Heatset inserts (standard voron issue) - 2 for seating plenum to base - 2 for seating plenum lid to plenum -- 8x 4x6 mm or 6x3 cylindrical magnets +- 8x ⌀4x6 mm or ⌀6x3 mm cylindrical magnets - 1x 2 pin JST header - 2x M3x10 SHCS - for seating plenum to base From f1a359f5211f05c89d9a19003b2366794a2d8ec0 Mon Sep 17 00:00:00 2001 From: Anders Einar Hilden Date: Thu, 4 May 2023 21:16:23 +0200 Subject: [PATCH 2/3] Remove "cylindrical" from magnet specs, 6x3 is more "round". --- README.md | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/README.md b/README.md index 28bd1ed..35a9226 100644 --- a/README.md +++ b/README.md @@ -233,7 +233,7 @@ AU: Unique Prints (https://uniqueprints.shop), PhaserFPV (https://www.phaserfpv. - 5x M3, 5 mm OD, 4 mm height heatset inserts (standard voron issue) - 2 for seating plenum to base - 2 for seating plenum lid to plenum -- 8x ⌀6x3 mm cylindrical magnets +- 8x ⌀6x3 mm round magnets - 1x 2 pin JST header - 4x M3x16 BHCS - for heat inserts that go into the four fan tabs @@ -268,7 +268,8 @@ Optional for Vorons or any printer using 24PSU - 4x M3, 5mm OD, 4mm height Heatset inserts (standard voron issue) - 2 for seating plenum to base - 2 for seating plenum lid to plenum -- 8x ⌀4x6 mm or ⌀6x3 mm cylindrical magnets +- 8x ⌀4x6 mm or ⌀6x3 mm magnets + - Make sure to print correct parts (4x6 or 6x3 files) - 1x 2 pin JST header - 2x M3x10 SHCS - for seating plenum to base From 6e9b8563bf1f06e98acfb947d2eafc9dfda3c404 Mon Sep 17 00:00:00 2001 From: Anders Einar Hilden Date: Thu, 18 May 2023 15:03:45 +0200 Subject: [PATCH 3/3] Fix number of heat inserts for V5 Copy from PR #32 by MarcelRobitaille --- README.md | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/README.md b/README.md index 35a9226..c478ac1 100644 --- a/README.md +++ b/README.md @@ -230,9 +230,10 @@ AU: Unique Prints (https://uniqueprints.shop), PhaserFPV (https://www.phaserfpv. - GDStime 6000rpm Dual Ball bearing on Aliexpress (This is 12V rated fans) - Delta BFB0524HH (This is 24V rated fans) - Avoid mechatronics fans for this purpose. -- 5x M3, 5 mm OD, 4 mm height heatset inserts (standard voron issue) - - 2 for seating plenum to base - - 2 for seating plenum lid to plenum +- 6x M3, 5 mm OD, 4 mm height heatset inserts (standard voron issue) + - 1 in plenum base to secure plenum lid + - 1 in cartridge base to secure cartridge lide + - 4 in fans (2 in each fan × 2 fans) - 8x ⌀6x3 mm round magnets - 1x 2 pin JST header - 4x M3x16 BHCS