WebUSB

[jnthbdn]

On Linux, the board may not be accessible. To fix this, it needs to add a udev rule

1. Create the udev rule file:
   echo 'SUBSYSTEM=="usb", ATTR{idVendor}=="0d28", ATTR{idProduct}=="0204", MODE="0666"' | sudo tee /etc/udev/rules.d/70-dev-board.rules
2. Reload udev rules :
   1. sudo udevadm control --reload-rules
   2. sudo udevadm trigger

If you are using a snap package (e.g. brave). Add the raw-usb connection: snap connect brave:raw-usb.