How to Setup the Pi OS from scratch

Install Tailscale
- Easy follow guide on website
Install python3
- sudo apt-get update
- sudo apt-get install python3.13
Install docker and setup necessary containers
- Must setup kuksa.val container and influxdb container
  - Steps will go here when I figure them out
Connect ssh to GitHub account MAY NOT BE NECESSARY
- ssh-keygen -t ed25519 -C "gmab222@uky.edu" or your email in place of mine
- Also might not be necessary if we make a “folder of stuff configured to send to the dashboard”
Upload kuksa-can-provider with logs
- I’m thinking about putting these both into the same directory
Upload config stuff for kuksa.val
- It's important to upload because you wont get the config right doing it yourself just like the previous time you did this.
Install Flutter using Snap
- https://snapcraft.io/install/flutter/raspbian
Install xwindow
- Its possible you dont need to install it
Add “video=HDMI-A-1:800x480M@60” to ~/../boot/firmware/cmdline.txt to config the screen
You can use startx PROGRAM, where PROGRAM is the absolute path to the program you want to display
Before using the dashboard you must initialize the can line using:
- sudo /sbin/ip link set can0 up type can bitrate 500000

Provide feedback