ThreadProject/ExportThread.pythreadCoordinates.txt at main · fetlab/ThreadProject · GitHub

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
[[[  0.           0.           0.        ]
  [ 92.99999967  94.59999973   2.        ]]

 [[ 92.99999967  94.59999973   2.        ]
  [ 92.99999967 149.60000055   2.        ]]

 [[ 92.99999967 149.60000055   2.        ]
  [137.00000033 149.60000055   2.        ]]

 [[137.00000033 149.60000055   2.        ]
  [137.00000033  94.59999973   2.        ]]]

T1 ; change tool to Extruder 2
G92 E0 ; set the current filament position to E2=0
G0 Y0 ; Move bed to 0
;Spool points: ((46.39138231140468,47.189513652534124),(186.58740629774329,189.79751234344462))
;Target spool points: (186.58740629774329,189.79751234344462)
;Theta, tTheta, dTheta: (-90.0,46.300661590540855,136.30066159054084)
G1 E-53.95 Z4.012632407644408 F800
;Spool points: ((92.99999967217445,20.547692219645697),(92.99999967217445,214.45230778035432))
;Target spool points: (92.99999967217445,214.45230778035432)
;Theta, tTheta, dTheta: (46.300661590540855,104.18183392229808,57.88117233175723)
G1 E-22.91 Z2.0 F800
;Spool points: ((22.792080771438236,149.600000551343),(212.20791922856176,149.600000551343))
;Target spool points: (212.20791922856176,149.600000551343)
;Theta, tTheta, dTheta: (104.18183392229808,18.723411756240136,-85.45842216605794)
G1 E33.83 Z2.0 F800
;Spool points: ((137.00000032782555,19.419675840590713),(137.00000032782555,215.5803241594093))
;Target spool points: (137.00000032782555,19.419675840590713)
;Theta, tTheta, dTheta: (18.723411756240136,-78.75527621611707,-97.4786879723572)
G1 E38.59 Z2.0 F800
T0 ; change back to normal extruder