#Build the Bot
Building the Visabot is fairly simple. Please note that on the base plate the green dots need to point upwards.
##Build steps
The parts required for the built is in your container
Attach the Servo motors using the supplied cable ties. Add the supplied screws add pins to hold the Arduino
Attaching the little yellow motors are slightly different. You need four cable ties in total.
Attach the BallCaster wheel under your VisaBot. The one in your kit is red.
Attach the little cross attachment from the Small servos to the wheels. Put the strips of bicycle tube over the wheels to ensure grip.
Add the Arduino - you might want to bolt the Arduino onto the base plate. Bolts available on request
Add the motor Driver and the batteries. Ensure both is wired up to the Arduino correctly.
Add the top plate over the Visabot.
##Program it
Now attach the USB cable and start programming it.