I have an off brand DHT11 module that I got in a variety pack on amazon. I have tried many different configurations and GPIO pins but cannot get it to read.
I keep getting DHT Sensor not found, check wiring
The module has a different pinout order (VCC, Data, GND). I have wired it up properly.
I have tried both 3.3v and 5v
Maybe I am missing a resistor? Although I read the module on a board has a built in resistor.
From other threads I have read it seems like it could be the refresh rate of the data.. I tried changing the 18ms to 01ms as another suggested and it did not fix.
[url=https://ibb.co/VD2XSDy][img]https://i.ibb.co/826F523/2-F25-F8-F5-6-B6-B-4-A7-A-875-E-1-B3-B9-E54-AD47.jpg[/img][/url]
My next approach was to unsolder the sensor itself and wire it up as is with a resistor.
I have an off brand DHT11 module that I got in a variety pack on amazon. I have tried many different configurations and GPIO pins but cannot get it to read.
I keep getting DHT Sensor not found, check wiring
The module has a different pinout order (VCC, Data, GND). I have wired it up properly.
I have tried both 3.3v and 5v
Maybe I am missing a resistor? Although I read the module on a board has a built in resistor.
From other threads I have read it seems like it could be the refresh rate of the data.. I tried changing the 18ms to 01ms as another suggested and it did not fix.
[url=https://ibb.co/VD2XSDy][img]https://i.ibb.co/826F523/2-F25-F8-F5-6-B6-B-4-A7-A-875-E-1-B3-B9-E54-AD47.jpg[/img][/url]
My next approach was to unsolder the sensor itself and wire it up as is with a resistor.