Flashing, testing, scope of delivery

• auto-peering on the LAN bridge (4aa2d9a)
• tun0 in WAN zone (see Add cjdns firewall zone and rules #35)
• individual hyperboria credentials
  • revoke them after $n months to encourage people to participate
  • MUST survive factory reset
• cjdroute.conf MUST be generated only after delivery
  • i.e. when the user themselves powers up the router for the first time
  • tell people to first factory reset, in order to make sure they have a fresh cjdroute.conf
  • luci button for regeneration of keypair
• test procedure, all scripted
  • 1. plug laptop into lan port
  • 2. power up router
  • 3. flash openwrt-factory image
  • 4. reboot
  • 5. wait for peering router <> laptop
  • 6. check hype connectivity
  • 7. auto-update and signature rollover
  • 8. factory reset
  • 9. done

[davefilmsus]

Can I get a link to upload for my Nanostation M2?

[wfleurant]

Dave, OpenWrt.org has images once flashed allow for an opkg install luci-app-cjdns Also supplied is the OpenWrt ImageBuilder. I would shoot for Chaos Calmer version. Create an image with ImageBuilder and choose the luci-app-cjdns package. The image should fit within 4MB of flash memory. If you are at the 8MB flash size then you can download the image and run the opkg commands. This is your gear? http://wiki.openwrt.org/toh/ubiquiti/nanostation

[davefilmsus]

Thanks. I will try this.

Dave Johnson
Sent from my iPad

On May 23, 2015, at 3:55 PM, William Fleurant notifications@github.com wrote:

Dave, OpenWrt.org has images once flashed allow for an opkg install luci-app-cjdns Also supplied is the OpenWrt ImageBuilder. I would shoot for Chaos Calmer version and create an image with ImageBuilder if you are at the 4MByte flash size. In any case the ImageBuilder should be perfect for your gear.

—
Reply to this email directly or view it on GitHub.