Checklist fixes

Author: petriw

ApolloMissionChecklists/GnC_GnCSys_IMUPwrDn/checklist.json

@@ -2,7 +2,7 @@
   "Spacecraft": 0,
   "ProjectName": "GnC_GnCSys_IMUPwrDn",
   "Group": "G&C 2: SYSTEM MGMT",
-  "Name": "IMU: POWER UP",
+  "Name": "IMU: POWER DOWN",
   "NameTranslations": {},
   "CustomName": "ApolloMissionChecklists",
   "Side": 0,

ApolloMissionChecklists/LMAct_PDIDay_MissionTimer/checklist.json

@@ -31,7 +31,7 @@
       "Type": 0,
       "SetID": 0,
       "ToPosID": 0,
-      "Text": "Sync Mission Timer ( [C] -> SYNC MET TIMERS ) or set it manually",
+      "Text": "Sync Mission Timer ( [C] -> SYNC MET TIMERS ) or set it manually, and START the timer.",
       "Description": "Manual step"
     }
   ],

ApolloMissionChecklists/LMTimeline_PostDocking/checklist.json

@@ -31,7 +31,7 @@
       "Type": 0,
       "SetID": 0,
       "ToPosID": 0,
-      "Text": "V48E, V21E +12021, PRO",
+      "Text": "V48E, V21E 12021, PRO",
       "Description": "Manual step"
     },
     {

CommandModule/AlignmentsGNP52RefsmmatAlign/checklist.json

@@ -359,7 +359,7 @@
       "Type": 0,
       "SetID": 0,
       "ToPosID": 0,
-      "Text": "V15 flashing. Perform next MARK.",
+      "Text": "V51 flashing. Perform next MARK.",
       "Description": "Manual step"
     },
     {

CommandModule/TLITransLunarInjection/checklist.json

@@ -44,11 +44,11 @@
     },
     {
       "Program": 0,
-      "Type": 4,
-      "SetID": 29,
+      "Type": 0,
+      "SetID": 0,
       "ToPosID": 0,
-      "Text": null,
-      "Description": "push GDCAlign (4/29)"
+      "Text": "G&C GENERAL -> GDC ALIGN TO IMU [Simplified]",
+      "Description": "Manual step"
     },
     {
       "Program": 0,

LunarModule/StagingDPSSupCritHeVent/checklist.json

@@ -1,11 +1,14 @@
 {
-    "Group": "STAGING",
-    "Images": [],
-    "Name": "DPS SUPCRIT He VENT",
-    "ProjectName": "StagingDPSSupCritHeVent",
-    "Side": 1,
-    "SortPriority": 1510,
-    "Spacecraft": 1,
-    "Steps": [],
-    "checklistText": "DPS SUPERCRITICAL He VENTING (LUNAR SURFACE ONLY)\r\n\r\n\tDPS Propellant Tank Venting is\r\n\tprerequisite to this procedure \r\n\r\n1.\tVent supercritical helium:\r\n\r\nPANEL 1:\r\n\t\tHELIUM MON sel - SUPERCRIT PRESS\r\n\t\tPRPLNT TEMP/PRESS MON sw - DES 1\r\nPANEL 8:\r\n\t\tDES PROPUL:\r\n\t\t\tFUEL VENT sw - OPEN: tb - gray\r\n\t\t\tOXID VENT sw - OPEN: tb - gray\r\nPANEL 1:\r\n\t\tDES He REG 1 sw - OPEN: tb - gray\r\n\t\tDES He REG 2 se - OPEN: tb - gray\r\nPANEL 8:\r\n\t\tCB PROPUL: DES He REG/VENT - open\r\n\r\nRemarks:\r\nFUEL VENT latching valve is open when tb - gray\r\nOXID VENT latching valve is open when tb - gray\r\nREG 1 & 2 SOV's and vent velves will be left open to\r\ninsure that descent supercritical helium, fuel and\r\noxidizer tanks will be at minimum pressure when ascent\r\nengine FITH occurs.\r\n\t\t\r\n2.\tVerify supercritical helium pressure decreasing"
+  "Spacecraft": 1,
+  "ProjectName": "StagingDPSSupCritHeVent",
+  "Group": "STAGING",
+  "Name": "DPS SUPCRIT He VENT",
+  "NameTranslations": {},
+  "CustomName": null,
+  "Side": 1,
+  "SortPriority": 1510,
+  "AutoGenerate": false,
+  "checklistText": "DPS SUPERCRITICAL He VENTING (LUNAR SURFACE ONLY)\r\n\r\n\tDPS Propellant Tank Venting is\r\n\tprerequisite to this procedure \r\n\r\n1.\tVent supercritical helium:\r\n\r\nPANEL 1:\r\n\t\tHELIUM MON sel - SUPERCRIT PRESS\r\n\t\tPRPLNT TEMP/PRESS MON sw - DES 1\r\nPANEL 8:\r\n\t\tDES PROPUL:\r\n\t\t\tFUEL VENT sw - OPEN: tb - gray\r\n\t\t\tOXID VENT sw - OPEN: tb - gray\r\nPANEL 1:\r\n\t\tDES He REG 1 sw - OPEN: tb - gray\r\n\t\tDES He REG 2 sw - OPEN: tb - gray\r\nPANEL 11:\r\n\t\tCB PROPUL: DES He REG/VENT - open\r\n\r\nRemarks:\r\nFUEL VENT latching valve is open when tb - gray\r\nOXID VENT latching valve is open when tb - gray\r\nREG 1 & 2 SOV's and vent velves will be left open to\r\ninsure that descent supercritical helium, fuel and\r\noxidizer tanks will be at minimum pressure when ascent\r\nengine FITH occurs.\r\n\t\t\r\n2.\tVerify supercritical helium pressure decreasing\n\n\n",
+  "Steps": [],
+  "Images": []
 }

Mercury/SystemGyroAlign/checklist.json

@@ -3,10 +3,12 @@
   "ProjectName": "SystemGyroAlign",
   "Group": "SYSTEMS",
   "Name": "GYRO ALIGN",
+  "NameTranslations": {},
+  "CustomName": null,
   "Side": 1,
   "SortPriority": 40,
   "AutoGenerate": false,
-  "checklistText": "<size=24>GYRO ALIGN</size>\nRemarks: \n1) Use ONLY if errors in GYRO or in Horizon Scanners\n2) Gyros to NORMAL will slave the platform to the Horizon Scanners.\n3) Use FBW if you are in FREE or GYRO CAGE mode\n\n1. Gyro \t\t\t\t- GYRO CAGE\n2. Attitude\t\t\t- 0, 0, 0\nManeuver the attitude to the 0,0,0 attitude, using window reference, eye sight, or periscope.\n3. Gyro \t\t\t\t- FREE\n\n\n<size=22>HORIZON CHECK</size>\n\n1. Attitude\t\t\t- RETROGRADE\nAlign the spacecraft with the retrograde horizon. You can also use the marks on the periscope\nThe readings should read about 0, 0, 0\nIf not, realign the gyros",
+  "checklistText": "<size=24>GYRO ALIGN</size>\nRemarks: \n1) Use ONLY if errors in GYRO or in Horizon Scanners\n2) Gyros to NORMAL will slave the platform to the Horizon Scanners.\n3) Use FBW if you are in FREE or GYRO CAGE mode\n\n1. Gyro \t\t\t\t- GYRO CAGE\n2. Attitude\t\t\t- 0, 0, 0\nManeuver the attitude to the 0,0,0 attitude, using window reference, eye sight, or periscope.\n3. Gyro \t\t\t\t- FREE\n\n\n<size=22>HORIZON CHECK</size>\n1. Attitude\t\t\t- RETROGRADE\nAlign the spacecraft with the retrograde horizon. You can also use the marks on the periscope.\n\nThe readings should read about roll 0°, pitch -34°, yaw 0°\nIf not, realign the gyros\n\n",
   "Steps": [],
   "Images": []
 }