FR: Add status information for AMS drying

[NilsRo]

If there is no printing in progress it would be nice if the monitor could show AMS status specifically spool drying infos like remaining time and actual heat. Would be helpful if the user waits for that to start a print.

If it is not complex to add this to screen rotation it would be also helpful to see that aside the printer status but at most it would be nice to know if the printer is idling.

Cheers,
Nils

PS. Saw in one of the last commits that AMS is planned. Would be nice to see drying in an early release. 😃

[Keralots]

Hello!

If you like please test new firmware v2.7 in release section. When you launch drying, it should automatically display drying screen. Any suggestions/improvement are welcomed!

[NilsRo]

@Keralots

Works very well and many thanks for the work behind the monitor!!!

Some comments:

• Should be °C (not 'C)
• Have connected 1 AMS 2 Pro and 3 AMS HT. The AMS numbering seems wrong as I see AMS 1 twice.
• Every data shown has the same priority, temperature is a little too prominent in my personal opinion.
• • Drop the decimal place, it has no purpose
• • use a grid design
• • Remaining time is interesting at the end of drying as I can directly see if I can go down in 10 minutes instead of checking the clock
• I am sure you still spend a thought but it would be nice to see the filament color and type.

Something like this:

PS. Perhaps you can add remaining time rotating with ETA to safe space. This would be also cool for printing screen.

[NilsRo]

@Keralots Hi. Did you recognize the reply? Comments? As the insue is closed I like to be sure that it is not overseen.

Cheers
Nils