Dfrobot Sim808 join network error with Telenor Denmark

[danielkp1234]

So I trying to get it to join my sim provider network and send TCP request. My Operator is Telenor Danmark
here is the Serial Output
18:09:07.450 -> AT+CFUN=1
18:09:07.484 -> AT+CPIN?
18:09:12.023 -> Init Success, please call or send SMS message to me!
18:09:12.092 -> AT+CSTT="internet","",""
18:09:17.046 -> AT+CIICR
18:09:22.056 -> AT+CIFSR
18:09:27.043 -> Sim808 join network error
18:09:29.062 -> AT+CSTT="internet","",""
18:09:34.077 -> AT+CIICR
18:09:39.068 -> AT+CIFSR
18:09:44.084 -> Sim808 join network error

here is my code
`#include <DFRobot_sim808.h>
#include <SoftwareSerial.h>

//#define PIN_TX 10
//#define PIN_RX 11
//SoftwareSerial mySerial(PIN_TX,PIN_RX);
//DFRobot_SIM808 sim808(&mySerial);//Connect RX,TX,PWR,

//make sure that the baud rate of SIM900 is 9600!
//you can use the AT Command(AT+IPR=9600) to set it through SerialDebug

DFRobot_SIM808 sim808(&Serial);

char http_cmd[] = "GET /admin/Scripts/submit?x=8.869531&y=56.414029 HTTP/1.0\r\n\r\n";
char buffer[512];

void setup(){
//mySerial.begin(9600);
Serial.begin(9600);

//******** Initialize sim808 module *************
while(!sim808.init()) {
delay(1000);
Serial.print("Sim808 init error\r\n");
}
delay(3000);
Serial.println("Init Success, please call or send SMS message to me!");

//*********** Attempt DHCP *******************
while(!sim808.join(F("internet"),F(""),F(""))) {
Serial.println("Sim808 join network error");
delay(2000);
}

//************ Successful DHCP ****************
Serial.print("IP Address is ");
Serial.println(sim808.getIPAddress());

//*********** Establish a TCP connection ************
if(!sim808.connect(TCP,"My.website", 80)) {
Serial.println("Connect error");
}else{
Serial.println("Connect success");
}

//*********** Send a GET request *****************
Serial.println("waiting to fetch...");
sim808.send(http_cmd, sizeof(http_cmd)-1);
while (true) {
int ret = sim808.recv(buffer, sizeof(buffer)-1);
if (ret <= 0){
Serial.println("fetch over...");
break;
}
buffer[ret] = '\0';
Serial.print("Recv: ");
Serial.print(ret);
Serial.print(" bytes: ");
Serial.println(buffer);
break;
}

//************* Close TCP or UDP connections **********
sim808.close();

//*** Disconnect wireless connection, Close Moving Scene *******
sim808.disconnect();
}

void loop(){

}`