How to install firmware?

[AndrewMars2015]

How to install firmware?

[archlute]

Where this cfw needs to be installed to? Flashed into the Behringer device itself? Into the Linux Distro? There seem to be binaries ( exetutable ones?) and assembler code. There is no description where and how to handle these files.

[CodeKill3r]

There is a 8pin serial EEPROM in the controller in a socket.
You have to overwrite it using an EEPROM programmer.

[davy39]

Hi,
I wanna try to flash your cfw into my board.
Is it to be flashed into the Atmel 24C64 ?
Could you tell me which of the 2 binary files I should use ?
Could you confirm that it's working well before me to try ?
Thanks fo your time.

[CodeKill3r]

If you can overwrite, you can also save the original contents before (backup) so you can revert back if you don't like it.
Obviously the later (fixed ccw) is the latest, but doesn't take much time to test both.
It works well for me, but use it at your own risk, i do not take any responsibility.

[berkin88]

Eeprom is 24c64, if you want to program, you must use this product.
https://www.amazon.com/24LCXX-Programmer-EEPROM-Reader-Writer/dp/B00L4Z8ETY

[xd2]

The full step-by-step procedure has been documented here @AndrewMars2015 @archlute
BCD2000 firmware update.pdf