2026.02.08 with no SD card continuously logs error message

[dlundqvist]

Output on USB console:

Platform: BlueSCSI (Pico2/W)
FW Version: 2026.02.08-rel Feb  8 2026 23:09:47
Flash chip size: 4096 kB
Reclock Pico 2/2W based boards to standardized speed
Initial Clock set to 150MHz
Reclocking the MCU to 155MHz
Setting the SDIO clock to 26MHz
After reclocking, system reports clock set to 155MHz
Timeout waiting for response in rp2040_sdio_command_R1(16), PIO PC: 5 RXF: 0 TXF: 0
Timeout waiting for response in rp2040_sdio_command_R1(16), PIO PC: 6 RXF: 0 TXF: 0
Timeout waiting for response in rp2040_sdio_command_R1(16), PIO PC: 4 RXF: 0 TXF: 0
Timeout waiting for response in rp2040_sdio_command_R1(16), PIO PC: 4 RXF: 0 TXF: 0
Timeout waiting for response in rp2040_sdio_command_R1(16), PIO PC: 6 RXF: 0 TXF: 0
Timeout waiting for response in rp2040_sdio_command_R1(16), PIO PC: 4 RXF: 0 TXF: 0
SD Error Code: 0x02
No SD card detected, please check SD card slot to make sure it is in correctly
SD card init failed, sdErrorCode: 2 sdErrorData: 0
SD Error Code: 0x02
SD Error Code: 0x02
SD Error Code: 0x02
...

This did not happen with previous version if I remember correctly.